New Product Release

After much anticipation OPT has released 3 NEW PRODUCTS!!!!! 

In this blog particularly, I cannot stress enough the beauty of synergy within our products. Together these products (and all OPT products, for that matter) collaborate and excel each other to enhance the over all performance and appearance.

1. OPTIMUM HYPER COMPOUND

•  OHP (Optimum Hyper Compound) is the ultimate compound for fast paint correction with few compounding swirls and LOW DUSTING. The real benefit of this product is how fast it works and like all other OPT products, how much easier it makes your job. 
• The super-micro abrasives cut quickly to remove 1200 grit sanding scratches, acid rain, and severe swirls and holograms.
• Provides an easy to refine surface.
• Used with the Foam Core Wool Pad or the Orange Waffle pad, Hyper provides both cut and gloss, without dust or hazing. 

Hyper Compound

Before and After

just ONE PASS! 

-Shout out to Joel, good work!-

2.  HYPER WOOL FOAM PAD

• New formula short napped wool face, with a soft foam interface to follow surface contours. 
• This cutting pad in combination with Optimum Hyper Compound, Intense Polish, or Hyper Polish can be used for a variety of correction challenges. 
• Combined with OHP it will quickly remove 1500G sanding marks and provide a surface that requires final polishing prior to coating or wax application. 
• The wool surface provides unequaled cut while the foam backing keeps the pad cool for longer passes and greater efficiency. 
• Generates an advantage for you in longer working life of the pad and less working time for you. 

3.  INTENSIVE POLISH 

• Cutting polish that provides a gloss finish with moderately aggressive cutting abilities! 
• The first and only one-step spray polish (patent pending) in the marketplace. 
• Designed to remove 1200 grit and finer scratches in one or two passes while creating a great finish in seconds. 
• Cuts through wet sanding marks and deep scratches.
• My favorite thing to say about our products; How does this make your job easier?? Because it is a spray, it provides ease while using and reduces the amount of product (cost efficiency) needed to a fraction. Just one spray is enough to cover the entire pad making the whole pad do the cutting and eliminates dry buffing. 

CLICK HERE TO PURCHASE

Simple Steps To Follow 

1. Wash the vehicle with ONR (Optimum No Rinse)
2. Decontaminate the paint using an Optimum Clay Towel and the ONR on the surface from the wash as the lubricant.
3. Determine the level of correction required an start with your first correction step over the ONR dampened surface, no need to dry or tape off the vehicle. 
4. Dampen your chosen pad with ONR wash (preferably in a pad washer) and simply spray 1 shot of Hyper Compound on the pad, no need to prime or use a large amount of product. Less is best.
5. Move your Zentool slowly over the surface with a tool speed only as high as needed to allow the backing plate to turn. Excessive speed is counterproductive as it creates heat. Do not add pressure, the weight of the tool is sufficient. 
6. Clean pad of excess product and paint residue after every section and keep clean and damp.
7. Once the correction step is complete, start polishing. No need to wipe off minimal Hyper Compound residue. 
8. Test a spot to determine whether you need Hyper Intensive Polish or Hyper Polish (Hyper Intensive Polish is more intense) to refine the surface. 
9. Polishing step should require minimal time and passes, as any correction should be taken care of in the first steps. 

NOTE: You do not have to use the Polish after the Compound if you have already achieved your desired results. They do compliment each other, but each also works very well without the other.